OVERVIEW:

The BPS-805 Benchtop Liquid Permeability System is a set of benchtop components for performing flow tests on core samples to determine specific, effective, and relative permeability. The system can be configured to use liquids and gases at ambient temperatures. The standard plug size coreholder can be utilized to 5,000 psig confining pressure and up to 4500 psig pore pressure with 1.0 inch and 1.5 inch diameter samples that are up to 4 inches long. Full diameter options are also available. Standard material of construction is 316 Stainless Steel.

FEATURES:
•  Complete system for performing liquid permeability tests
•  Can be supplied with a variety of fluid delivery systems including a low cost HPLC type or pulsation free Quizix dual cylinder pumps
•  Easy to use CHG-106 hassler coreholder with simple overburden pressure control system
•  Dual differential pressure transducers with digital displays and bypass valves
•  Can be supplied with optional piston or bladder accumulators
•  Computer control data acquisition system available as an option with easy to use data acquisition software 
•  Corrosion resistant materials used throughout
•  Dome-loaded back pressure regulator included

SPECIFICATIONS:
Maximum Confining pressure: 5,000 psi (higher pressures available upon request)
Maximum Pore Pressure: 4,500 psi  (higher pressures available upon request
Maximum operating temperature: ambient to 40 oC
(With coreholder mounted on frame)
Core diameter:
1.5" standard, optionally 1.0" and 30mm
Core length: 1" to 4" maximum
Pore fluid wetted materials:
316 Stainless Steel, Viton™, Teflon™
Confining Pressure System: manual pump with gauge, bleed and isolate valves
Standard Pumping System: HPLC single piston type: 0-10 cc/min maximum 5000 psi (other pumps available upon request)
Back Pressure Regulator: dome-loaded type